Thermal Oil heated reactor process temperature and operation process
The Thermal Oil heated reactor is in the process of operation because heat transfer oil can be added to the heating interlayer of the reaction kettle. During operation, an appropriate amount of heat transfer oil can be added to the interlayer according to the size of your reactor, and then a steam is passed through. The boiler supplies steam to heat the heat transfer oil in the reactor jacket. The heat transfer oil acts as a constant temperature.
The Thermal Oil heated reactor the steam in the reaction vessel as an additional conduit, and the steam cannot directly contact the heat transfer oil. There are spiral pipes inside the sandwich, which we can't see from the outside. In general, steam has an air inlet and an air outlet. These two ports are the two ports of the sandwich Reed spiral pipe. See which two ports are connected. A trap is also installed at the air outlet after the air inlet and outlet are determined. A pressure valve is also installed on the mezzanine. To ensure safe use.
The working principle of the thermal Oil heated reactor is to heat the reaction jacket jacket or the heat transfer oil in the coil with an electric heating tube, so that the temperature of the heat transfer oil rises to the process temperature required by the user, and then the temperature measuring electrical component is turned off. constant temperature. Widely used in medical drugs, chemicals, physical goods, food additives, light industry and other industries.
https://www.syhgzben.com/
