The use of dry dispersion equipment usually requires the following steps:
1. Preparation work: Before operating the drying and dispersing equipment, it is necessary to prepare the equipment, including checking whether the equipment is intact, cleaning the inside of the equipment, and confirming whether the required raw materials and auxiliary materials are fully prepared.
2. Loading: Add the materials to be dried and dispersed into the hopper or silo of the equipment. When loading, you need to pay attention to controlling the feeding speed and amount of the materials to ensure that the equipment can operate normally and will not be overloaded.
3. Set parameters: According to the properties of the material and production requirements, set the working parameters of the drying and dispersing equipment, including heating temperature, speed, processing time, etc. Ensure that the parameter settings of the equipment meet the drying and dispersing requirements of the material.
4. Start the equipment: Start the drying and dispersing equipment according to the requirements of the equipment operation manual, and gradually adjust the working parameters of the equipment to the set values. After starting the equipment, it is necessary to closely observe the operation of the equipment to ensure that the equipment can operate normally.
5. Monitor operation: During the operation of the equipment, it is necessary to continuously monitor the operating status of the equipment, including temperature, speed, material flow, etc. If any abnormal situation is found, timely measures should be taken to adjust or shut down the equipment.
6. Collect products: After the materials have been dried and dispersed, collect the products as needed. This can be done through the discharge port of the equipment or other methods. When collecting products, attention should be paid to ensuring the quality and safety of the products.
7. Cleaning equipment: After use, clean the drying and dispersing equipment in time, including cleaning up debris and dirt inside and outside the equipment to ensure the normal operation of the equipment and extend the service life of the equipment.
https://www.syhgzben.com/
