Wuxi Suyang Chemical Equipment Co., Ltd

High quality product, professional service, being the core supplier in Chemical Equipment industry!

Home > Knowledge > Content
Working process of electric heating reaction kettle and precautions for its installation and use
- Nov 21, 2018 -

In the process of working, the electric heating reaction kettle mainly uses the electric heating rod to heat the heat conduction oil inside the jacket, so that the temperature of the heat conduction oil rises to the required temperature, and the temperature measuring electric heating rod makes the power supply constant temperature. Widely used in medical drugs, chemicals, food, naturally occurring condiments, food additives, light industry and other industries.

Electric heating reaction kettle needs to be in the high-pressure operation room that meets the explosion-proof requirements during the installation process. When equipment is equipped with multiple reactors, the equipment should be placed separately, and each two equipments should be separated by a safety explosion-proof wall. Inter-operating rooms should have access to the outside and exits. When there is explosive medium, ensure that the equipment is well ventilated.

In the process of use, it is necessary to put a certain amount of nitrogen in theElectric heating reaction kettle for 30 minutes, and check whether the equipment leaks when using it. If it is found to be leaking, it is necessary to use soap to find the pipeline and tube. The leak point of the mouth, find out the gas after the gas is tightened, and then pass the nitrogen pressure test again to ensure normal operation after no leakage.

The kettle body and the kettle lid of the electric heating reaction vessel are in contact with the wire of the circular surface of the gasket or the tapered surface, and the two nuts are pressed against each other by the tightening of the main nut to achieve a good sealing effect. When the nut is tightened, the angle symmetry must be added gradually. The force is tightened and the force is even. The lid of the kettle is not allowed to tilt to one side to achieve a good sealing effect.

https://www.syhgzben.com/